well
Adds well features to lines.
Adds well features to one or more existing lines in the geometry.
well Line_1
Adds a well feature to Line_1.
well Line_2 Line_3
Adds well features to Line_2 and Line_3.
well (Line_6 Line_4)
Adds well features to Line_6 and Line_4.
<{1,...}: <Line'|Polycurve'>>'
| {1,...} 1 ∞ | Sequence of one or more lines | |
| Line | Line object reference | Name of the line to which a well feature should be added |
| Polycurve | Polycurve object reference | Name of the polycurve to which a well feature should be added |
| Mode | Target |
|---|---|
| Geometry | Global |
{1,...} Well
Creates a line between two points (which may either exist, or will be created) and add a well feature to it.
well Point_1 (5 6)
Creates a new line between Point_1 and a new point with coordinates (5, 6) and adds a well feature to it.
well Point_1 Point_4
Creates a new line between Point_1 and Point_4 and adds a well feature to it.
well (1 4) (6 5)
Creates a new line between two new points with coordinates (1, 4) and (6, 5) and adds a well feature to it.
<Point'|<Coords: Number' Number'>'> <Point'|<Coords: Number' Number'>'>
| Point | Point object reference | Name of the start point of the well |
| Coords | Coordinates | |
| Number | x | x-coordinate |
| Number | y | y-coordinate |
| Point | Point object reference | Name of the end point of the well |
| Coords | Coordinates | |
| Number | x | x-coordinate |
| Number | y | y-coordinate |
| Mode | Target |
|---|---|
| Geometry | Global |
Creates lines between three or more points (which may either exist, or will be created) and add well features to them.
well Point_1 (5.1 6.4) Point_3
Creates two lines, one between Point_1 and a new point with coordinates (5.1, 6.4) and one between the new point and Point_3, and adds well features to both lines.
<Point{3,...}: <Point'|<Coords: Number' Number'>'>>
| Point{3,...} 3 ∞ | Sequence of three or more points | |
| Point | Point object reference | Names of the points between which the well should be created |
| Coords | Coordinates | |
| Number | x | x-coordinate |
| Number | y | y-coordinate |
| Mode | Target |
|---|---|
| Geometry | Global |
Creates one or more lines by either giving absolute coordinates or relative coordinates, by giving the angles with respect to the xy-plane and a length or a vector describing the direction and a length and add well features to them.
well 1 2 "relative" 3 4
Creates a line from a new point with coordinates (1, 2) to another new point which is 3 in the x- and 4 in the y-direction from the first point at (4, 6) and adds a well feature to it.
well Point_1 "relative" 3 4 -5 -9 "angles" 30 16
Creates a line from Point_1 (1, 2) to a new point which is 3 in the x- and 4 in the y-direction from the first point at (4, 6). From that new point a line is created to another new point which is -5 in the x- and -9 in the y-direction from the previous point at (-1, -3). From that point a new line is created which has an angle of 30 degrees with respect to the xy-plane and a length of 16, this line ends at coordinates (12.86, 5). Adds well features to all lines.
well (1 2) "angles" 45 10 "absolute" (4 5)
Creates a line from a new point with coordinates (1, 2) which has an angle of 45 degrees with respect to the xy-plane and a length of 10. Then creates a line from the end point of the first line to a new point with coordinates (4, 5) and adds well features to all lines.
<Point'|<Coords: Number' Number'>'> <{1,...}: <<<Text: "absolute"> <Point{1,...}: <Point'|<Coords: Number' Number'>'>>>|<<Text: "angles"> <{1,...}: <Number'(°) <Number'|<Line'>>>'>>|<<Text: "relative"> <Coords{1,...}: <Coords: Number' Number'>'>>|<<Text: "vector"> <{1,...}: <<Coords: Number' Number'>' <Number'|<Line'>>>'>'>>>
| Point | Point object reference | Point from which the well must start |
| Coords | Coordinates | |
| Number | x | x-coordinate |
| Number | y | y-coordinate |
| {1,...} 1 ∞ | Sequence of one or more line sub-commands | |
| Text | "absolute" | Create a well by giving absolute coordinates |
| Point{1,...} 1 ∞ | Sequence of one or more points | |
| Point | Point object reference | Point where the well ends |
| Coords | Coordinates of the point where the well ends | |
| Number | x | x-coordinate |
| Number | y | y-coordinate |
| Text | "angles" | Create one or more wells by giving two angles and a length per well |
| {1,...} 1 ∞ | Sequence of one or more specifications of angles and length of the well or object to which the well should snap | |
| Number | Angle | Angle of the well with respect to the xy-plane |
| Number | Length | Length of the well that should be created |
| Line | Line object reference | Name of the line to which the created well should snap |
| Text | "relative" | Create one or more wells by giving relative coordinates |
| Coords{1,...} 1 ∞ | Sequence of one or more coordinates | |
| Coords | Coordinates of the point, relative to the starting point, where the well ends | |
| Number | x | x-coordinate |
| Number | y | y-coordinate |
| Text | "vector" | Create one or more wells by giving a vector and a length or object to which the well should snap per well |
| {1,...} 1 ∞ | Sequence of one or more vectors and length of the well or object to which the well should snap | |
| Coords | Vector that defines the direction of the well that should be created | |
| Number | x | x-value |
| Number | y | y-value |
| Number | Length | Length of the well that should be created |
| Line | Line object reference | Name of the line to which the created well should snap |
| Mode | Target |
|---|---|
| Geometry | Global |
Adds well features to one or more existing lines in the geometry and directly set their properties.
well Line_1 "Behaviour" "Extraction"
Adds a well feature to Line_1 and sets the behaviour to "Extraction".
well (Line_2 Line_3) "Behaviour" "Extraction"
Adds well features to Line_2 and Line_3 and sets the behaviour to "Extraction" for both wells.
<{1,...}: <Line'|Polycurve'>>' <PropValue{1,...}: <PropValue: Text' Any>'>
| {1,...} 1 ∞ | Sequence of one or more lines | |
| Line | Line object reference | Name of the line to which a well feature should be added |
| Polycurve | Polycurve object reference | Name of the polycurve to which a well feature should be added |
| PropValue{1,...} 1 ∞ | Sequence of one or more property-value pairs | |
| PropValue | Property-value pair | |
| Text | Property name | |
| Any | Value of the property |
| Mode | Target |
|---|---|
| Geometry | Global |
{1,...} Well
Creates a line between two points (which may either exist, or will be created), add a well feature to it and directly set its properties.
well Point_1 (5 6) "Behaviour" "Extraction"
Creates a new line between Point_1 and a new point with coordinates (5, 6), adds a well feature to it and sets the behaviour to "Extraction".
<Point'|<Coords: Number' Number'>'> <Point'|<Coords: Number' Number'>'> <PropValue{1,...}: <PropValue: Text' Any>'>
| Point | Point object reference | Name of the start point of the well |
| Coords | Coordinates | |
| Number | x | x-coordinate |
| Number | y | y-coordinate |
| Point | Point object reference | Name of the end point of the well |
| Coords | Coordinates | |
| Number | x | x-coordinate |
| Number | y | y-coordinate |
| PropValue{1,...} 1 ∞ | Sequence of one or more property-value pairs | |
| PropValue | Property-value pair | |
| Text | Property name | |
| Any | Value of the property |
| Mode | Target |
|---|---|
| Geometry | Global |
Creates lines between three or more points (which may either exist, or will be created), add well features to them and directly set their properties.
well Point_1 (5.1 6.4) Point_3 "Behaviour" "Extraction"
Creates two lines, one between Point_1 and a new point with coordinates (5.1, 6.4) and one between the new point and Point_3, adds well features to both lines and sets the behaviour to "Extraction" for both wells.
<Point{3,...}: <Point'|<Coords: Number' Number'>'>> <PropValue{1,...}: <PropValue: Text' Any>'>
| Point{3,...} 3 ∞ | Sequence of three or more points | |
| Point | Point object reference | Names of the points between which the well should be created |
| Coords | Coordinates | |
| Number | x | x-coordinate |
| Number | y | y-coordinate |
| PropValue{1,...} 1 ∞ | Sequence of one or more property-value pairs | |
| PropValue | Property-value pair | |
| Text | Property name | |
| Any | Value of the property |
| Mode | Target |
|---|---|
| Geometry | Global |
Creates one or more lines by either giving absolute coordinates or relative coordinates, by giving the angles with respect to the xy-plane and a length or a vector describing the direction and a length, add well features to them and directly set their properties.
well 1 2 "relative" 3 4 "Behaviour" "Extraction"
Creates a line from a new point with coordinates (1, 2) to another new point which is 3 in the x- and 4 in the y-direction from the first point at (4, 6), adds a well feature to it and sets the behaviour to "Extraction".
<Point'|<Coords: Number' Number'>'> <{1,...}: <<<Text: "absolute"> <Point{1,...}: <Point'|<Coords: Number' Number'>'>>>|<<Text: "angles"> <{1,...}: <Number'(°) <Number'|<Line'>>>'>>|<<Text: "relative"> <Coords{1,...}: <Coords: Number' Number'>'>>|<<Text: "vector"> <{1,...}: <<Coords: Number' Number'>' <Number'|<Line'>>>'>'>>> <PropValue{1,...}: <PropValue: Text' Any>'>
| Point | Point object reference | Point from which the well must start |
| Coords | Coordinates | |
| Number | x | x-coordinate |
| Number | y | y-coordinate |
| {1,...} 1 ∞ | Sequence of one or more line sub-commands | |
| Text | "absolute" | Create a well by giving absolute coordinates |
| Point{1,...} 1 ∞ | Sequence of one or more points | |
| Point | Point object reference | Point where the well ends |
| Coords | Coordinates of the point where the well ends | |
| Number | x | x-coordinate |
| Number | y | y-coordinate |
| Text | "angles" | Create one or more wells by giving two angles and a length per well |
| {1,...} 1 ∞ | Sequence of one or more specifications of angles and length of the well or object to which the well should snap | |
| Number | Angle | Angle of the well with respect to the xy-plane |
| Number | Length | Length of the well that should be created |
| Line | Line object reference | Name of the line to which the created well should snap |
| Text | "relative" | Create one or more wells by giving relative coordinates |
| Coords{1,...} 1 ∞ | Sequence of one or more coordinates | |
| Coords | Coordinates of the point, relative to the starting point, where the well ends | |
| Number | x | x-coordinate |
| Number | y | y-coordinate |
| Text | "vector" | Create one or more wells by giving a vector and a length or object to which the well should snap per well |
| {1,...} 1 ∞ | Sequence of one or more vectors and length of the well or object to which the well should snap | |
| Coords | Vector that defines the direction of the well that should be created | |
| Number | x | x-value |
| Number | y | y-value |
| Number | Length | Length of the well that should be created |
| Line | Line object reference | Name of the line to which the created well should snap |
| PropValue{1,...} 1 ∞ | Sequence of one or more property-value pairs | |
| PropValue | Property-value pair | |
| Text | Property name | |
| Any | Value of the property |
| Mode | Target |
|---|---|
| Geometry | Global |